









The VIVOSUN AeroLight 120W LED Grow Light combines full-spectrum LED lighting and active canopy air circulation in one compact fixture designed for approximately 2 x 2 ft coverage, equivalent to around 61 x 61 cm. It is a practical lighting solution for smaller indoor grow tents and growing spaces where efficient lighting, adjustable output and additional air movement are required without taking up unnecessary space.
Rated at 120W, the AeroLight uses VIVOSUN's optimised diode layout and Micro-Lens optical design to distribute light more consistently across the growing area and direct useful light deeper into the plant canopy. For the exact 120W model, VIVOSUN specifies an efficiency of 3.00 µmol/J and a PPFD of 608 µmol/m²/s at 12 inches.
Unlike a conventional LED grow light, the AeroLight 120W also incorporates a built-in central circulation fan. The integrated airflow helps move air through the plant canopy, reducing stagnant areas while supporting more balanced CO₂ movement and humidity distribution. The fixture is also compatible with the VIVOSUN GrowHub smart control system, providing app-based lighting, airflow and scheduling control when connected to a compatible GrowHub controller.
The VIVOSUN AeroLight 120W is designed to integrate with the wider VIVOSUN Smart Grow System, allowing lighting and integrated canopy airflow to be managed through compatible smart-control equipment.
When connected to a compatible VIVOSUN GrowHub controller, the AeroLight can be controlled through the VIVOSUN App, allowing growers to adjust light intensity, spectrum and airflow remotely.
Scheduled automation can also be configured through the VIVOSUN smart ecosystem, making it easier to organise lighting and circulation settings around different stages of indoor plant development.
GrowHub dimming provides 25%, 50%, 75% and 100% settings plus OFF, while the VIVOSUN App supports adjustable light output from 25% to 100%, plus OFF.
Important: A VIVOSUN GrowHub smart controller is sold separately and is not included with this standalone AeroLight 120W.
Temperature, relative humidity and VPD monitoring should not be advertised as included functions of this product because the required environmental sensing hardware is not supplied with the light itself.
Lighting is supplied by the VIVOSUN AeroLight 120W / VSL-AL120, a compact LED grow light designed specifically for approximately 2 x 2 ft indoor grow coverage.
The fixture produces a tunable full spectrum, allowing the lighting characteristics to be adapted to different stages of plant development rather than relying on a single fixed lighting profile.
VIVOSUN's current AeroLight design uses an optimised diode arrangement to provide consistent light distribution across the growing footprint. The manufacturer specifies light uniformity of up to 0.91, helping provide more consistent illumination from the centre towards the edges of the canopy.
For the exact 120W model, VIVOSUN specifies a lighting efficiency of 3.00 µmol/J and a PPFD of 608 µmol/m²/s measured at 12 inches.
Manual and GrowHub control provides 25%, 50%, 75% and 100% intensity settings plus OFF, while connection through the VIVOSUN App provides adjustable output from 25% to 100%, plus OFF.
The sealed lighting construction carries an IP65 protection rating, helping protect the fixture against dust and moisture exposure. Aluminium heatsink fins assist with thermal management, while VIVOSUN specifies a rated lifespan of up to 50,000 hours.
Model: VIVOSUN AeroLight 120W / VSL-AL120
Power: 120W
Dimensions: 12.9 x 12.9 x 2.1 in / approx. 32.8 x 32.8 x 5.4 cm
Weight: 3.9 lb / approx. 1.8 kg
Recommended Coverage: 2 x 2 ft
Approx. Metric Coverage: 61 x 61 cm
Spectrum: Tunable full spectrum
Efficiency: 3.00 µmol/J
PPFD: 608 µmol/m²/s at 12 in
Light Uniformity: Up to 0.91
Manual/GrowHub Dimming: 25% / 50% / 75% / 100% / OFF
VIVOSUN App Dimming: 25–100% / OFF
Integrated Fan: Yes
Integrated Fan Speed: 2600 RPM
Maximum Airflow: 84 CFM according to the current retail listing
Noise Rating: 33 dB(A)
Input Voltage: 120–240VAC, 50–60Hz
Maximum Input Current: 1.05A
Power Factor: >0.9
Protection Rating: IP65
Rated Lifespan: 50,000 hours
The AeroLight 120W is designed to provide lighting coverage for approximately a 2 x 2 ft growing footprint, making it particularly suitable for compact grow tents and similarly sized indoor growing areas.
A 2 x 2 ft footprint is approximately 61 x 61 cm, while the fixture itself measures only approximately 32.8 x 32.8 x 5.4 cm.
Its compact square construction allows the light to provide overhead illumination while leaving space around the fixture for extraction, filtration and other environmental-control equipment.
The integrated central circulation fan can also provide additional air movement through the plant canopy, complementing the primary grow tent ventilation system.
Grow tent not included.
Because this listing is for the AeroLight LED fixture only, grow tent canvas, reflective Mylar, frame poles, ventilation openings and other tent components do not form part of this product.
A key feature of the AeroLight 120W is its built-in central circulation fan, which combines active canopy airflow with the LED lighting fixture.
The integrated fan pushes air through and around the plant canopy, helping reduce stagnant air pockets while improving movement of air around leaves. VIVOSUN also describes the circulation system as helping improve CO₂ distribution and humidity balance within an indoor growing environment.
The current exact retail listing specifies a maximum airflow of 84 CFM and a published operating noise level of 33 dB(A).
The current VIVOSUN technical manual identifies a maximum fan speed of 2600 RPM for the VSL-AL120.
When connected to a compatible GrowHub controller, airflow can be adjusted alongside lighting intensity and spectrum as part of the VIVOSUN Smart Grow System.
Air Circulation Type: Integrated central canopy fan
Fan Speed: 2600 RPM
Maximum Airflow: 84 CFM on the current retail product listing
Noise Rating: 33 dB(A)
Smart Control: VIVOSUN GrowHub compatible
VIVOSUN App Control: Supported through compatible GrowHub setup
Adjustable Airflow: Yes
Inline Extraction Fan: Not included
Carbon Filter: Not included
Ventilation Ducting: Not included
The AeroLight's integrated circulation fan is designed primarily for canopy air movement. It should not be treated as a replacement for a dedicated grow tent inline extraction system where active extraction and carbon filtration are required.
Specification Note: VIVOSUN's current retail product page lists 84 CFM, while the separate VSL-AL120 technical manual currently lists 104 CFM. For this The Hippie House product listing, 84 CFM is used because it is the figure published on the exact retail product page supplied for this model.
According to VIVOSUN's current AeroLight 120W product documentation, the package includes the lighting fixture and mounting/control connection accessories required for standard installation.
| Specification Details | |
|---|---|
| Brand | VIVOSUN |
| Product Type | LED Grow Light with Integrated Circulation Fan |
| Model | AeroLight 120W / VSL-AL120 |
| Light Wattage | 120W |
| Light Coverage | 2 x 2 ft |
| Approx. Metric Coverage | 61 x 61 cm |
| Fixture Dimensions | 12.9 x 12.9 x 2.1 in |
| Approx. Metric Dimensions | 32.8 x 32.8 x 5.4 cm |
| Weight | 3.9 lb / approx. 1.8 kg |
| Spectrum | Tunable full spectrum |
| Efficiency | 3.00 µmol/J |
| PPFD | 608 µmol/m²/s at 12 in |
| Light Uniformity | Up to 0.91 |
| Light Dimming | 25/50/75/100% + OFF |
| VIVOSUN App Dimming | 25–100% + OFF |
| Protection Rating | IP65 |
| Rated Lifespan | 50,000 hours |
| Integrated Circulation Fan | Yes |
| Maximum Retail-Listed Airflow | 84 CFM |
| Fan Speed | 2600 RPM |
| Noise Level | 33 dB(A) |
| Input Voltage | 120–240VAC, 50–60Hz |
| Maximum Input Current | 1.05A |
| Power Factor | >0.9 |
| Smart Controller Compatibility | VIVOSUN GrowHub |
| App Compatibility | VIVOSUN App through compatible GrowHub |
| Remote Spectrum Control | Supported with compatible smart setup |
| Remote Intensity Control | Supported with compatible smart setup |
| Remote Airflow Control | Supported with compatible smart setup |
| GrowHub Included | No – sold separately |
| Grow Tent Included | No |
| Inline Fan Included | No |
| Carbon Filter Included | No |
| Ducting Included | No |
The VIVOSUN AeroLight 120W LED Grow Light is well suited to indoor gardeners building or upgrading a compact 2 x 2 ft grow space and looking for LED lighting and active canopy air circulation in one fixture.
Its combination of 120W tunable-spectrum lighting, 3.00 µmol/J efficiency, 608 µmol/m²/s PPFD at 12 inches and integrated circulation provides a coordinated approach to managing two important parts of an indoor growing environment: light distribution and movement of air through the plant canopy.
The compact fixture measures approximately 32.8 x 32.8 cm, making it particularly practical for smaller grow tents. Its optimised diode arrangement provides broad 2 x 2 ft coverage, while the IP65-rated construction and aluminium heatsink design support reliable use in an indoor growing environment.
Growers who want additional automation can pair the AeroLight with a compatible VIVOSUN GrowHub controller. This provides access to the VIVOSUN App for remote spectrum, light intensity, airflow and scheduling controls, allowing the fixture to become part of a wider VIVOSUN Smart Grow System.
For a compact indoor setup, the AeroLight 120W provides a useful combination of full-spectrum LED grow lighting, adjustable output, integrated canopy circulation and optional smart-control integration without requiring a large overhead fixture.
Available in Australia from The Hippie House.